|
Big Change App
|
◀︎ BACK
(01) App Dashboard
|
If you should need to use a harness in conjunction with the works you are carrying out, you should indicate so here by selecting the Tick and then completing the safety questionnaire.
|
|
If no harness is required, then you should indicate ‘No’ by clicking on the ‘Cross’ and completing your name etc.
|
|
If a harness is being used, you will need to inspect all aspects of the harness and confirm if they are fit for purpose. You can do so for the main body of the harness here. Select ‘Yes’ if you have inspected it, and ‘No’ if you can’t.
|
|
If you are unable to inspect the Harness, then please detail why here and do not proceed to use it. Contact the office then for further instructions.
|
|
Is the Main Body of the Harness acceptable for use. Select ‘Yes’ if it is and ‘No’ if it is not.
|
|
If the harness is not fit for use, then DO NOT USE IT and report this to the office.
|
|
Have you been able to inspect the Lanyard?
Select ‘Yes’ if you have been able to, and ‘No’ if you have not been able to for any reason. If you can’t inspect the Lanyard, complete the reason why you can’t inspect it and then the Harness should not be used. |
|
Have you been able to inspect the Snap Hook?
|
|
Select ‘Yes’ if you have been able to, and ‘No’ if you have not been able to for any reason. Again, if you cannot inspect this component, then the Harness should not be used.
|
|
If you can’t inspect the Snap Hook, complete the reason why you can’t inspect it and then the Harness should not be used.
|
|
If the Snap Hook is not fit to use, then you should select No and not use the Harness
|
|
All the Stitching holding the Harness together should be closely inspected. If for any reason you cannot inspect the stitching, then Do Not Use the Harness and report it to the office.
|
|
If the Stitching is all intact and fit for purpose, then select ‘Yes’ and proceed. If it isn’t, then select ‘No’, and Do Not Use the Harness.
|
|
The Buckle on the Harness should be closely inspected. If for any reason you cannot inspect the Buckle, then Do Not Use the Harness and report it to the office.
|
|
If the Buckle is all complete and fit for purpose, then select ‘Yes’ and proceed. If it isn’t, then select ‘No’, and Do Not Use the Harness.
|
|
The D-Ring on the Harness should be closely inspected. If for any reason you cannot inspect the D-Ring, then Do Not Use the Harness and report it to the office.
|
|
If the D-Ring is all intact and fit for purpose, then select ‘Yes’ and proceed. If it isn’t, then select ‘No’, and Do Not Use the Harness.
|
|
The Webbing on the Harness should be closely inspected. If for any reason you cannot inspect the Webbing, then Do Not Use the Harness and report it to the office.
|
|
If the Webbing is all intact and fit for purpose, then select ‘Yes’ and proceed. If it isn’t, then select ‘No’, and Do Not Use the Harness.
|
|
The Labels on the Harness should be closely inspected. If for any reason you cannot inspect the Labels, then Do Not Use the Harness and report it to the office.
|
|
Report here any other concerns or information regarding the Harness. REMEMBER, your safety is paramount, and the Harness should not be used if you have any concerns whatsoever about its integrity. If in any doubt, ring the office for guidance.
|
|
Complete your name.
|
|
Add your Signature
|
|
Add the Date and Time of the Inspection.
|